Using Additional Handsets; Registering Handsets - BT FREELANCE 101 User Manual

Using additional handsets

28
IMPORTANT
You must choose a
handset that is GAP
compatible to use with
your BT Freelance 101.
Please note
When a BT Freelance
101 handset is not
registered to a base,
the and
symbols will flash and
will scroll from left to
right on the display.
Call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
If you purchase a new handset to use
with your BT Freelance 101 it will
have to be registered to the base.
You will need to do this before you
can use it.
If you have purchased a BT Freelance
101 multiple pack any additional
handsets come pre-registered to the
base. With 2 or more handsets, you
can make internal calls, page handsets
and transfer external calls between
your handsets.
You can register and use up to five
handsets with your BT Freelance 101
base. Your BT Freelance 101 handset
can only be used on one base at a time.
EXT
INT
-
Registering a new BT Freelance
101 handset to your BT Freelance
101 base
To put the BT Freelance 101 base into
registration mode:
1. Press and hold
3 seconds, until the base beeps and
the In use light flashes, then release
the button. The handset will now
remain in registration mode for 90
seconds.
Find
for approximately