General Information; Safety - BT FREELANCE 101 User Manual

General information

Safety

General
•
Only use the power supply
included with the product. Using
an unauthorised power supply
will invalidate your guarantee and
may damage the telephone. The
item code for the base mains
power supply is 032763. If you
have purchased a BT Freelance
101 multiple pack, the item code
for the charger mains power
supply is 032765.
•
For the handset use only
approved Nickel Metal Hydride
(NiMH) rechargeable batteries.
Never use other batteries or
conventional alkaline batteries.
They could lead to a short circuit
or destroy the battery casing.
•
Recommended batteries should
have a power rating of 550mAh
1.2V. Batteries are available from
the BT Freelance 101 Helpline
0870 605 8047.
•
Do not open the handset or base
(other than to change batteries).
This could expose you to high
voltages or other risks. Contact
the Helpline for all repairs.
•
It is recommended that advice
from a qualified medical expert
be sought before using this
product in the vicinity of
emergency/intensive care
medical equipment.
Call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
•
It is recommended that if you
have a pacemaker fitted you
check with a medical expert
before using this product.
•
Your product may interfere with
other electrical equipment, e.g.
TV and radio sets, clock/alarms
and computers if placed too
close. It is recommended that
you place your product at least
one metre away from such
appliances to minimise any risk
of interference.
•
Never dispose of batteries in a
fire. There is a serious risk of
explosion and/or the release of
highly toxic chemicals.
Cleaning
• Simply clean the handset and
base/charger with a damp (not
wet) cloth, or an anti-static wipe.
Never use household polish as
this will damage the product.
Never use a dry cloth as this may
cause a static shock.
Environmental
• Do not expose to direct sunlight.
• The product may heat up when
the batteries are being
recharged. This is normal.
However, we recommend that
you do not place the product on
antique/veneered wood to avoid
damage.
35 35 35