Help - BT FREELANCE 101 User Manual

Help

Many common problems are caused by the telephone and
power cables being incorrectly connected, not connected at
all or, the power being switched off. Please check that your
BT Freelance 101 has been correctly set up (see page 4)
before ringing the BT Freelance 101 Helpline.
No display
• The batteries may be flat or dead.
• Recharge or replace the batteries, see page 5.
No dial tone
• Is the telephone line cord plugged into the telephone
wall socket?
• Check that the base station is connected to the mains power
and switched on.
You cannot link up with the base station
• Is the icon flashing in the display?
• The mains power cable may not be connected at the base or
switched on.
• Are you in range of the base? Move closer to the base.
• The batteries could be low or flat.
• Recharge or replace the batteries.
No ring on the handset
• Check that the base unit is plugged into the phone socket
and that the mains power is switched on.
• The ringer volume may be set too low for you. See page 25
to adjust the volume.
Call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
33 33 33