Table of Contents
Advertisement
To stop the alarm
When the alarm time is up, the handset will ring. Press
Stop
or any button on the keypad (except
the alarm. The handset display will return to standby.
The alarm will ring for 30 seconds and then it will switch
off automatically and the display will return to standby.
Time & date
You can set the time and date on your BT Esprit 1250
using following the procedure shown. However, if you
have described to a Caller Display service via your
network service provider, the time and date will be set
automatically on receipt of your first incoming call.
1. Press
Menu
then use the navigation buttons to move
and
to highlight
2.
Handset Settings
highlight
Time Settings
Set Alarm
3.
is highlighted, press
Date & Time
and press
4. The first digit is highlighted. Enter the date, using 2
digits for the day, month and year.
5. Press
then enter the time, using 2 digits for the
hour and 2 for the minute.
If you experience any problems, please call the Helpline on 0870 605 8047
and press
is highlighted, press
and press
OK
.
to highlight
OK
.
) to stop
OK
.
to
Set
Time settings
If you have more than one handset
registered to your BT Esprit 1250
base, you only need to set the time
and date on one handset and all
handsets will be updated
automatically.
The default date setting is
01/01/05.
The default time setting is
12.01pm, using the 12 hour
time format.
DD/MM/YY
HH:MM
85
Advertisement
Table of Contents
