Table of Contents
Advertisement
General information
IMPORTANT
This equipment is not designed for making
emergency telephone call when the power fails.
Alternative arrangements should be made for
access to emergency services.
This product is intended for connection to
analogue public switched telephone networks and
private switchboards in the United Kingdom.
Safety information
•
Only use the power supply suitable for the BT
Esprit 1250 range. Using an unauthorized power
supply will invalidate your guarantee and may
damage the telephone. The item code for the
base mains power supply is 022072. If you have
purchased a multiple pack the item code for the
charger mains power supply is 025231.
•
For the handset, use only AAA Nickel Metal
Hydride (NiMH) rechargeable batteries with a
minimum capacity of 750mAh. Never use other
batteries or conventional alkaline batteries as this
could lead to a short circuit or destroy the battery
casing.
•
If the keylock is switched on, it is possible to
make calls, including emergency numbers
(999/112).
•
Do not open the handset (except to replace the
handset batteries). This could expose you to high
voltages or other risks.
•
Radio signal transmitted between the handset
and base may cause interference to hearing aids.
If you experience any problems, please call the Helpline on 0870 605 8047
•
It is recommended that advice from a qualified
expert be sought before using this product in the
vicinity of emergency/intensive care medical
equipment.
•
It is recommended that if you have a pacemaker
fitted you check with a medical expert before
using this product.
•
Never dispose of batteries in a fire. There is a
serious risk of explosion and/or the release of
highly toxic chemicals.
Cleaning
•
Simply clean the handset and base with a damp
(not wet) cloth, or an anti-static wipe.
•
Never use household polish as this will damage
the product. Never use a dry cloth as this may
cause a static shock.
Environmental
•
Do not expose to direct sunlight.
•
The handset may become warm when the
batteries are being recharged. This is normal.
We recommend that you do not place the
product on antique/veneered wood to avoid
damage.
•
Do not stand your product on carpets or other
surfaces which generate fibres or place it in
locations preventing the free flow of air over its
surfaces.
•
Do not submerge any part of your product in
water and do not use it in damp or humid
conditions, such as bathrooms.
97
Advertisement
Table of Contents
