Display; Alarm; When The Alarm Goes Off - BT Concero 1400 User Manual

Display

You can choose to display the handset name or the time in the
standby screen.
1. Press the button to open the main menu.
2. Press or until the display shows
and press .
3. Press or until
4. Press or to select
to confirm.
5. Press and hold to return to standby.

Alarm

1. Press the button to open the main menu.
2. Press or until the display shows
.
3. Press until
alarM
4. Press or to select
5. If you select you should now enter the time in 24hr format,
On
i.e. for 07.30am enter
The icon will show on the standby screen to indicate that
the alarm is set.
6. Press and hold to return to standby.

When the alarm goes off

The alarm will only go off on the handset were it has been set
(this is indicated by the
alarm off by pressing any handset button, even if the keylock
has previously been activated.
The alarm will sound even if the handset ringer has been set to
off. The ringer will remain set to off after the alarm has sounded.
The alarm will sound with the handset ringer melody that has
been set and the screen will show
If the alarm sounds during a call, you will hear a beep in
the earpiece.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
hS SeTTingS
is displayed, press
DiSPlaY
or
TiMe hanDSeT naMe
hS SeTTingS
is displayed and press
or and press
On OFF
, and press
icon on the standby screen). Turn the
.
alarM On
to select.
, then press
and press
to select.
.
Use any key to disable the alarm when
it is activated.
.
25