Table of Contents
Advertisement
2. Insert 2 x AAA NiMH batteries (supplied) into the
handset. Slide the battery compartment cover into place.
1
2
3. Charge the handset batteries for at least 24 hours by
placing the handset on the base. The screen shows the
battery icon filling up.
4. Connect the telephone line cord to the base and plug the
other end into the wall socket.
Your BT Esprit 1250 is ready for use.
If you experience any problems, please call the Helpline on 0870 605 8047
3
Getting started
Talk/Standby time
Under ideal conditions, fully charged
handset batteries should give up
to 9 hours talktime or 65 hours
standby on a single charge.
Battery low warning
The handset battery symbol is
empty and you will hear a warning
beep. Start recharging your
handset right away.
When charging the battery, level
bars are animated.
Replacing batteries
Use only rechargeable 750mAh or
higher capacity AAA NiMH batteries.
Battery performance
When batteries are fully charged
the display shows a full battery
icon.
To keep your batteries in the best
conditions, leave the handset off
the base for a few hours at a time
(after the initial 24 hour charge).
Please note however, that new
NiMH batteries do not reach full
capacity until they have been in
normal use for several days.
9
Advertisement
Table of Contents
