Access Code - BT ESPRIT 1250 User Manual

and press OK .
4. Press or to select either
Saved is displayed.
5. Press to return to standby or
back in the menu.

Access code

1. Press Menu then use the navigation buttons to move
and to highlight
2. Handset Settings
Ringer
3. is highlighted, press
Code and press OK
4. Press or to select either
5. Press to highlight
To change an existing access code, press
it and then enter the new code using the keypad.
6. Press Save to keep the displayed settings.
displayed.
7. Press to return to standby or
back in the menu.
If you experience any problems, please call the Helpline on 0870 605 8047
On or Off
Back
Settings and press
is highlighted, press
to highlight
.
On or Off .
Code and enter the access code.
Back
and press Save .
to go one step
OK .
OK .
Access
Clear to delete
Saved is
to go one step
Handset settings
When your handset picture file is
full, you must delete pictures from
it before you can download new
ones. It is not possible to delete a
picture that is currently in use
either as your handset wallpaper or
as a picture associated with a
phonebook entry.
If your BT Esprit 1250 is connected
to a switchboard, you may need to
enter an access code in the dialling
sequence to be able to connect to
the outside line.
The access code will not be used
when you dial the number yourself
(rather than for example from the
phonebook) to allow you to make
calls to other switchboard
extensions.
The default setting is Off.
To add a pause in a number,
press and hold .
79