Set The Base Ringer Volume; Set A Pbx Access Code - BT XD56 Quick Setup And User Manual

Set the base ringer volume

1. Press , scroll
2. BS RINGER is displayed, press
is displayed and press
3. The current base ringtone will play at the current
volume. Use the
decrease the volume, or turn the ringer off. You will
see the volume level change on the display.
4. Press to save your choice. You will hear a
confirmation tone.

Set a PBX access code

1. Press , scroll
2. BS RINGER is displayed, press
displayed and press
3. Enter the number you want (maximum of 1 digit) and
press to save. You will hear a confirmation tone.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
to BS SETTINGS and press
until RING VOLUME
.
or button to increase or
to BS SETTINGS and press
until PBX ACCESS is
.
There are 5 base ringer volume
levels plus Ringer Off. The
.
default setting is Level 3
.
If you're connected to a
switchboard, you might
need to enter an access code
(e.g.9) before each number
is dialled. Your BT XD56 can
store an access code which is
automatically dialled before
each number.
If you wish to revert to not
using a PBX access code, you
need to go into the PBX code
menu and delete all the digit
by selecting Del., then press
to save.
Settings 45