Using The Touch-Screen Displays - Pfaff powerquilter 16.0 Owner's Manual

Using the Touch Screen Displays
Display Menus
Pedal
STOP
STOP
Pedal
25 %
STOP
87 %
STOP
54 %
0 %
25 %
87 %
54 %
25 %
More
Figure 18
0 %
0 %
Figure 19
25 %
87 %
54 %
Figure 20
25 %
More
The
powerquilter ™
16.0
touch-screen display on the front of the machine. Set-
tings are changed using this display.
Main Screen Button Functions (Figure 18)
Pedal Status
The status of the foot pedal connection is displayed
in the top left corner of the Main screen (Figure 18).
If the foot pedal is not properly connected the mes-
sage "Check Pedal" will appear. Once the pedal is
connected properly the word "Pedal" appears in that
space.
On/Off Indicator
The box in the center of Figure 19 indicates whether
or not the motor is running. It will be red when the
machine is stopped and green when the foot pedal is
pressed.
Current Speed
The box in the top right of Figure 19 is the current
percentage of full speed the machine is running. The
value displayed will vary as you press and release
the foot pedal. The maximum percentage value that
is displayed is controlled by the Limit that is set for the
machine.
Limit Controls
The Limit box encompasses two main features, the "My
Speed" controls and Preset buttons. The My Speed
controls consist of "+" and "-" buttons and the My
Speed display box (Figure 20). Pressing the "+" but-
ton will increase the maximum motor speed the pedal
controls. Pressing the "-" button will decrease the
maximum speed.
The My Speed range is between 5 % and 100 % or
between 75 and 1500 stitches per minute (SPM). The
current percentage My Speed value is displayed in the
box under the "Limit" text. This My Speed setting will
be preserved when the machine is shut off, allowing
you to begin quilting again at the same speed when
you turn the machine back on.
quilting machine has a color
Page 21