Pfaff powerquilter 16.0 Owner's Manual page 26

System Information
Serial Number
HA000000076
Type
C-Pod
Handles
Stitch Counters
Lifetime
Project
Back
0
mr
C
7
4
1
+/-
Back
Page 26
Board Firmware
2.00 3.22
2.00 2.01
000000000
000000000
Main
Figure 32
m+ mc
%
÷
CE
√
x
8 9
__
5 6
2 3 +
=
.
0
Main
Figure 33
System Information Screen
The serial number of the machine is displayed at the
top of the System Information screen. This number
matches the one found on the label at the back of the
machine.
Information contained in the white boxes below the
serial number identifies the electronics board revision
numbers as well as the firmware revision numbers
of the powerquilter ™
16.0
handlebars.
The Lifetime and Trip (or project) stitch counters count
the number of stitches the machine is performed. The
Lifetime count is the total number of stitches made since
the machine was built. The Trip Counter can be reset
to keep track of the number of stitches made during a
given project. To reset this counter, press the "Reset"
button found aligned with the Trip counter.
The Lifetime counter cannot be reset and should be
used as an indicator to determine when general
machine maintenance should be performed by an
authorized PFAFF® Representative. (Figure 32)
Press the "Main" button to return to the "Main" menu
screen or the "Back" button to return to the "More"
menu screen.
Calculator Screen
A basic six-function calculator is provided for your
convenience. (Figure 33) The functions provided are
addition, subtraction, multiplication, division, square
root and percent. The delete key on the top right may
be used to delete a digit mistakenly entered.
Press the "Main" button to return to the "Main" menu
screen or the "Back" button to return to the "More"
menu screen.
quilting machine and its