Pfaff powerquilter 16.0 Owner's Manual page 24

Back
Diagnostics
Diagnostics
Foot Pedal
Back
Diagnostics
Motor Sensor Test
Rotate the hand wheel
SLOWLY.
Passing Test
Regular pulsing beeps as
your rotate the hand wheel.
Failing Test
A solid tone or no beeping
at all as you rotate the
hand wheel.
Back
Page 24
Options
Volume
100%
Brightness
100%
Language
English
Main
Figure 26
Motor
Presets
Options
Needle
Speed
Main
Figure 27
Main
Figure 28
Options Screen (Figure 26)
Volume
The "Volume" portion of this screen has two buttons
and a sliding control. Pressing on the "minus -"
button lowers the sound of the buttons when they are
pressed. Pressing the "plus +" but ton turns the volume
to its loudest level. Pressing the sliding control in any
position sets the volume to the level indicated in that
control. Pressing and moving back and forth across the
sliding control will change the volume up as it is moved
left to right and down as it is moved from right to left.
Brightness
The "Brightness" portion of this screen has two buttons
and a sliding control as well. The LED Light Ring can
be turned on completely with the "plus +" button or
off completely with the "minus -" button. Pressing the
sliding control in any position will set the brightness to
the value indicated in the slider control. Pressing and
moving back and forth across the sliding control will
change the brightness up as it is moved left to right and
down as it is moved right to left.
Press the "Main" button to return to Main menu screen
or the "Back" button to return to the "More" menu
screen.
Diagnostics Screen (Figure 27)
Four different diagnostics tests can be performed on
the machine. These functions test the motor control
operation, the foot pedal and the internal position
sensors.
Press the "Main" button to return to the "Main" menu
screen or the "Back" button to return to the "More"
menu screen.
Diagnostics Tests (Figure 28)
Motor Sensor Test
The "Motor" Sensor test can help you determine
whether they may be a problem with the
quilting machine motor. Slowly rotating the hand
16.0
wheel should result in an audible "beep." If you get a
constant solid "beep" or no "beep" at all, this indicates
a failed test and the machine should be inspected by a
quali fied PFAFF® repair technician.
Press the "Main" button to return to the "Main" menu
screen or the "Back" button to return to the "More"
menu screen.
™
powerquilter