Installing The Color Touch-Screen - Pfaff powerquilter 1600 User Manual

Installing the Color Touch-Screen

The color touch-screen comes pre-installed on its
mounting bracket.
 NOTE: Confirm that the power is turned off
before installing the color touch-screen.
1. Remove the two bolts from the bag in which they
are packed.
2. There are two holes on front of the machine
head.
3. Align the holes in the color touch-screen bracket
with the two holes on the front of the machine.
4. Use a 3mm hex wrench to insert the two bolts
through the holes of the bracket and into the
machine. Tighten in place.
5. Plug the remaining cable end into the display
connector located on the side of the machine.
6. Remove the protective plastic from the touch-
screen before using.
™
powerquilter 1600 Quilting Machine User's Guide
| 15