System Requirements; Default Settings - TRENDnet TV-IP501W User Manual

Computer
CPU: For Intel x86 compatible CPUs: Intel Pentium IV 2.0Ghz or above

CPU: For IA64 compatible CPUs: AMD Athlon 64 3000+ and above

Memory: 1GB or above

VGA Resolution: 1024 x 768 or above (Independent Display Card recommended)

10BASE-T Ethernet or 100BASE-TX Fast Ethernet Network Interface Card

CD-ROM Drive for Setup Wizard on Installation CD-ROM

IPViewPro 2.0 Application Users must use Microsoft® Windows®2000, XP or Vista Operating

System with Internet Explorer 6.0 or above with DirectX9.0
Network
Local Area Network: 10Base-T Ethernet or 100Base-TX Fast Ethernet

Wireless: 802.11b/g wireless adapter

Note: When you connect multiple cameras and monitor their images synchronously, it is
recommended to use a high performance system, such as a Pentium 4 & 2.4GHz PC
Default configuration settings
Username
Password
IP address
Subnet Mask
TV-IP501W Internet Camera User Manual

System Requirements

Default Settings

This is the Username you will be prompted to enter when you access the
camera configuration screens using a Web browser. The default Username is
admin.
This is the Password you will be prompted to enter when you access the
configuration windows using a Web browser. The default Password is admin.
This is the IP address you will enter into the Address field of your Web browser
to access the camera monitor screen and configuration menus using a Web
Browser. The camera uses DHCP for IP settings by default. If a DHCP server is
not detected, the default IP address is 192.168.10.30. (Make sure your
computer is configured to belong to the 192.168.10.X subnet if using the default
IP address of the camera.)
The default subnet mask is 255.255.255.0
5