Table of Contents
Advertisement
Use the video display controls to change the view of the live video display. This is useful for multiple
camera application.
Camera configuration with IPViewPro
Access the camera configuration menus by clicking on the gear icon at the bottom of the right hand panel
of the IPViewPro user interface. Configuration options include adding and deleting cameras from the
display view, configuration of motion detection and digital input with schedules, recording options, email
alerts and other network settings.
The procedure to add a camera after the initial launch of the software is very similar to the procedure
used during the first setup. Follow the instructions below to add cameras.
1.
Click the Configuration icon to view the
Camera Setup menu. The top most tab of
the menu is the Camera Management tab. A
list of active cameras appears on the left half
of the menu. Select the camera to be added
from the list. Click the Add Camera by IP
Address to find the specified IP address or
network URL of the camera you want to add.
TV-IP501W Internet Camera User Manual
Live video display controls
Adding a Camera
36
Advertisement
Table of Contents
