Table of Contents
Advertisement
TV-IP501W Internet Camera User Manual
Wireless
On the Wireless page you can setup the wireless configuration for this camera.
Configuration Mode:
Choose the appropriate wireless configuration
mode for this camera. Infrastructure is used if this
camera will connect to an existing wireless
network. Ad-Hoc is used if this camera will connect
directly to a computer wireless.
SSID:
Here enter the SSID for the wireless network.
Wireless Channel:
Here select the correct channel for the wireless.
Alternatively you can click Site Survey which will
scan for an existing wireless network and enter the
above mentioned values automatically.
Transmission Rate:
Here you can choose the transmission rate
required.
Encryption Type:
Here you can setup the wireless security required
for this camera to connect to the wireless network.
You can choose one of 3 options, Disabled, WEP
and WPA/WPA2.
Beacon Interval:
Here you can enter the Beacon Interval used for
the wireless network.
Preamble:
Here you can choose the preamble used for your wireless network. Long or Short.
25
Advertisement
Table of Contents
