Table of Contents
Advertisement
Tempori_22_uk.qxd
29/05/01
1. SETUP
l
Plug one end of the spiral cord into the handset plug (A), and the other end into the
socket located on the left-hand side of the phone (B).
Plug the telephone cord into the socket (C) situated on the back of the set and plug
l
the other end (D) into the telephone wall socket.
D
NOTE: The spare socket (E) enables a modem to be connected.
Stick the emergency number label in the appropriate place.
l
2. WALL MOUNTING
To mount your telephone set on the wall, remove the wall mounting peg and put it back
in reverse position as described below. Bore two 6mm-large holes, spaced 70 mm apart.
Put two plugs in place, then, place in two screws (3.5 mm Ø and 25 mm long) without
tightening them.
Place the cord in the slot situated underneath the set.
17:05
Page 2
A
B
E
C
Wall mounted position
Horizontal position
Advertisement
Table of Contents
