Using The Memories; Choosing And Adjusting The Ringer - Alcatel TEMPORIS 22 User Manual

Tempori_22_uk.qxd 29/05/01

4. USING THE MEMORIES

NOTE: When programming your TEMPORIS communicates with you using
1 Beep : Whilst programming, each key pressed is validated by 1
2 Beeps : Indicate that your programming is correct.
3 Beeps : Something is wrong in your programming; Restart from the beginning.
Your telephone set can store 10 numbers of up to 24 digits.
4.1 PROGRAMMING THE MEMORIES
Programming without calling
Go off hook.
l
l Press the Programming key.
l Enter the number.
Press one of the ten memory keys.
l
Programming whilst calling
Go off hook.
l
l Enter the number.
l Press the Programming key whether you are in conversation or not.
l Press one of the ten memory keys.
4.2 DIALLING FROM A MEMORY
l Go off hook.
Press one of the ten memories keys. The loaded number is dialled automatically.
l
4.3 ERASING A MEMORY
Go off hook.
l
Press the Programming key twice.
l
Press the key corresponding to the memory to be erased.
l

5. CHOOSING AND ADJUSTING THE RINGER

You can choose and adjust one of the four melodies available when your telephone
is ringing, or at any time after entering the programming mode.
5.1 WHEN YOUR TELEPHONE IS RINGING
Modification of the ringer can be carried out during a ringing phase.
Press one of the keys 1, 2, 3 or 4 to change the melody.
l
To reduce or increase ringing volume, press
l
press or
Your modifications are memorized, you can answer the call.
5.2 WHEN IN PROGRAMMING MODE
To access the programming mode:
l Press and hold keys 1 and 3 simultaneously.
l Pick up the handset.
Release the keys.
l
BEEP
Access to programming mode is confirmed by 1 beep.
l
17:05 Page 5
on TEMPORIS 12.
BEEP
.
BEEP
.
or on TEMPORIS 22 or