Connecting The Base; Wall Mounting - Alcatel TEMPORIS 500 User Manual

All manuals and user guides at all-guides.com
Page 8

2.2 CONNECTING THE BASE

Connect one end of the telephone cable to the socket on the back left-hand side
of the base (C)
.
NOTE: The other socket (D) is for connecting a modem.

2.3 WALL MOUNTING

To wall mount the telephone set, remove, reverse and reinsert the mounting peg as
shown in the figure below.
Drill two horizontal holes of 6mm diameter with 86mm apart. Insert two wall plugs and
screws (3.5mm diameter and 25mm long) leaving the screw head protruded. Place the
cord in the slot under the base and hang the telephone onto the screws.
7
C
D
Wall mounted position Horizontal position