Programming Personal F1/F2 And Perso Tab Keys; Before Mounting An Alcatel 4029/4039 Set On A Wall - Alcatel OmniPCX Enterprise 4029 Manual

Chapter
2
Enter your password and press Apply
4. Select Loudspeaker and press the OK button.
5. Plug the external station speaker jack into the associated set connector.
2.2.4

Programming Personal F1/F2 and Perso Tab Keys

If the keys have not been programmed yet, press any key, then go to item 4 of the following
procedure.
If you want to change the number dialed by a programmed key:
1. From the Menu tab, select Settings
2. In the Settings menu, select My phone
The menu My phone appears
3. Select Key program
4. Enter your password
5. Press Apply
6. Select the personal key you want to program. This key can either be the F1 or F2 personal
key, or any key in the Perso tab, or any key of an additional key module
7. Select either:
• Services for the key to be used as a shortcut to trigger a specific phone feature
• Speed dial for the key to be used as a shortcut to dial any internal or external phone
number
8. Confirm your entries
Use the same Key program menu to modify or delete the contents of a programmable key.
2.3

Before Mounting an Alcatel 4029/4039 Set on a Wall

The set must be prepared to ensure the handset does not fall off the set when fixed on a wall.
1. Locate the position of the dowel to adjust on the set
2. Move the dowel up to extract it
3. Turn the dowel upside down
2-4