Base Unit Pin; The Call Timer - iDect X1 User Manual

Color profile: Generic CMYK printer profile
Composite Default screen
Base unit settings
DEREGISTER
Deregistering For details of the
handsets

Base unit PIN

The default PIN (personal identity number, or security
code) for the base unit is 0000. If you want to protect
your base unit's settings, you can change the PIN to any
four-digit number you'll easily remember. Once you've
changed it, you'll be asked for it every time you go into
BASE SETTING
the menu.
To change the PIN:
1 CHANGE PIN
Select the
è
The display shows
2
Key in your chosen new PIN then press the
PHONE/OK
è
The display shows
3 Key in your new PIN again then press the
PHONE/OK
è
The display goes back to standby mode.
If the PINs you key in at steps 2 and 3 don't
match, you'll hear an error tone, and you'll
need to try again from the beginning.
If you want to turn PIN protection off, follow the steps
above to change the PIN back to 0000. Then you won't
be asked for it when you change the base unit's settings,
although you'll still need it when you register a new
handset.
38
E:\Binatone2005\iDECT_X1\iDECT_X1_UK_draft02a.vp
25 August 2005 16:47:48
Call control
option, see page 28.
option
ENTER NEW PIN *

The call timer

CONFIRM NEW PIN *
Help Line: 0845 345 9677
Base unit settings
CALL CONTROL
The options let you monitor and
control the calls made on your iDECT X1. You can:
Use the call timer to see how much time has been
spent making outside calls.
For each handset, bar (prevent) international calls or
all outgoing calls.
For each handset, bar calls to numbers starting with
specified digits — for example, if you bar calls to
numbers starting with 090, you'll bar calls to premium
rate numbers; or if you bar calls to numbers starting
with 0, you'll bar calls to all non-local numbers.
Set up to four emergency numbers, which can
always be dialled even when other calls are barred.
To check the call timer:
1 Select the CALL CONTROL option
è
CALL TIMER
The display shows
2 Press the PHONE/OK button
è
You have three options:
TOTAL CALL DURATION
— to see how much
time in total has been spent on call since the
call timer was last reset.
LAST CALL DURATION — to see how long the
most recent call lasted.
RESET CALL DURATION
— to reset the call
timer to zero.
Use the â or á button to go to the option
3
you want, then press the PHONE/OK button
You can go back to the CALL TIMER
pressing the HANG UP button, then select a
different option.
(Local Call rate)
screen by
39