iDect X1 User Manual page 7

Color profile: Generic CMYK printer profile
Composite Default screen
Installation and set-up
6
Fit two rechargeable batteries in
each handset
A. Insert the batteries in the
compartment, with the end
of each battery facing away
from the cover.
Always use the rechargeable
batteries supplied — never
use any other kind of
batteries in the handset.
B. Carefully close the battery
compartment door,
matching the symbol on
the door to the symbol
on the handset
C. Turn the battery compartment door
anticlockwise (try using a 5p or 1p
coin) so that the symbol on the
door matches the symbol on the
handset
Make sure the battery compartment door is securely
in place. If you have problems fitting the batteries,
contact the Help Line on 0845 345 9677.
6
E:\Binatone2005\iDECT_X1\iDECT_X1_UK_draft02a.vp
25 August 2005 16:47:42
7
Charge the batteries for 15 hours
Before you use the handset for the
first time, it's important to charge the
batteries fully.
The handset 'beeps' when it's correctly
in position on the charging cradle.
Leave the handset on the charging
cradle for 15 hours.
8
Connect the base unit to the telephone line
Switch off power at the mains socket
Insert the telephone line plug into
the socket as shown
Switch mains power back on
Make sure the mains socket is
switched on if you want to use
the phone — it will not work
NOTE: the charger pod does not have
without electrical power
a connection to the telephone line.
The navigation buttons
In the instructions, these buttons are
represented by arrows, as shown here.
Help Line: 0845 345 9677
(Local Call rate)
Installation and set-up
The 'battery
charge level'
symbol blinks
Use the plug to
raise the shutter
before pushing
it into the socket
UP
LEFT RIGHT
DOWN
7