Omron CJ Series Operation Manual page 109

Sample Programs
Writing the Set Point
Summary
This program writes the set point (SP) for loop 1.
Example Unit Settings
• Unit: CJ1W-TC001 Temperature Control Unit
• Unit number: 00
Note The unit number switches are on the front of the Unit. Refer to 2-3-3 Unit Number Switches for details.
Example Program
The Setting Error Flag for loop 1 is bit 09 of CIO (n+8).
Execution condition
Loop 1 Setting Error Flag
200809
Reset condition
86
MOV(21)
D00000
2000
Setting
Error Flag
Appendix B