Table of Contents
Advertisement
12. Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-
Ring output. The connector powers up the system when a ringup
packet or signal is received through the internal modem card.
For external modems, Wake-On-Ring is detected through the COM
port.
NRL-LS/533
NRL-LS/533 Wake-On-Ring Connector
13. Wake-On-LAN Connector (3-pin WOL)
This connector connects to a PCI LAN card with Wake-On-LAN output.
The connector powers up the system when Magic Packet is received
through the PCI LAN card.
NRL-LS/533
NRL-LS/533 Wake-On-LAN Connector
2-26
®
Ground
Ring#
®
+5 Volt Standby PME
IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power
J6
WOL1
Ground
Chapter 2: Hardware information
Advertisement
Table of Contents
