Table of Contents
Advertisement
2. Microsoft Windows 2000 Server
I. ADAPTEC SCSI Driver Installation
The Microsoft Windows 2000 Server can auto detect the onboard AIC7892X
SCSI controller on the motherboard. You don't need to load or modify the
SCSI driver.
II. Broadcom Gigabit LAN Driver Installation
Installing the Driver Software
1. Verify that the Windows 2000 system is upgraded any necessary
Service Packs.
2. Start your Windows 2000 system and log in. You must have
Network Administrator privileges to install the driver software.
3. Open the Control Panel.
4. In the Control Panel, double-click the Network icon.
5. When the Network window opens, select the Adapters tab.
6. Click Add to install a new adapter. All previously installed drivers
are listed under Network Adapters.
7. When the Select Network Adapter window opens, click Have
Disk....
8. When prompted, insert the ASUS Support CD into your system's CD-
ROM drive, type the path to the driver, and click OK.
For example, to install the adapter driver software for Windows 2000,
type e:\Drivers\LAN\Broadcom\in the Insert Disk location box (where
"e:" is the designation of the CD-ROM drive on your system).
NOTE - If you acquired the adapter software on floppy disk or
from the Broadcom support website, enter the path to where the
adapter driver files reside on your system.
ASUS NRL-LS533 motherboard user guide
5-9
Advertisement
Table of Contents
