Table of Contents
Advertisement
Flow Control
•
Off (default)
•
AutoNegotiate (Symmetric Pause advertised) (Note 2)
•
RxPause
•
TxPause
•
RxPause/TxPause
NOTE: Autonegotiation of Flow Control is only valid when the Line
Speed is set to AutoNegotiate (all speeds advertised or single
speed advertised).
NOTE: A kernel relink and reboot is required before the new
configuration will take effect.
Jumbo Frames and Other Advanced Parameters
Jumbo MTU sizes and other advanced, tunable parameters for the BCM5700
controller are located in the file space.c in the directory /etc/conf/pack.d/bcme.
A description for each parameter is contained in space.c. Modify the desired
parameter in space.c, rebuild the kernel by doing /etc/conf/bin/idbuild and
rebooting the system. Note that the MTU sizes can be individually set for each
adapter in the system, whereas all other parameters apply globally to all adapters.
NOTE: 5705 does not support jumbo frames. It can transmit jumbo
packets by TCP segmentation, but the ethernet frame size is still
limited to 1514 bytes. Receive frame size is also limited to 1514 bytes.
III. ATI Rage XL Display Driver Installation
SCO OpenServer 5.0.6 system can correctly recognize ATI Rage XL graphic
controller (ATI RAGE PRO/LT-PRO/XL/Mobility (P/M/M1)) during
installation. User doesn't need to load or modify the video driver for the onboard
VGA device.
5-22
Chapter 5: Driver Installation
Advertisement
Table of Contents
