Hardware Specification - Grandstream Networks HT701 User Manual
Analog telephone adaptor
Hide thumbs
Also See for HT701:
- User manual (67 pages) ,
- Configuration manual (8 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Device Management
Dial Plan
Universal Switching
Power Adaptor
Environmental
Dimensions
(H x W x D)
Short Haul Loop
Call Handling Features
Caller ID
Polarity Reversal / Wink
EMC
Safety
Hardware Specification
The table below lists the hardware specification of HT701.
T
5: HT701 H
ABLE
ARDWARE
LAN Interface
LED
Universal Switching
Power Adaptor
Dimension
Weight
Temperature
Humidity
Compliance
Grandstream Networks, Inc.
Web interface or via secure encrypted AES or non-encrypted central configuration file
for mass deployment using Grandstream binary file or xml format. Auto/manual
provisioning system or via built-in IVR.
NAT-friendly remote software upgrade (via TFTP/HTTP/HTTPS) for deployed devices
including behind firewall/NAT. Syslog support. Full support of TR-069 management
protocol.
Yes
Input: 100–240 VAC/50-60 Hz 0.18A Max
Output: 12VDC, 0.5A, UL certified
o
o
Operational: 32
–104
F or 0
o
o
Storage: 10
–130
F / Humidity: 10–90% Non-condensing
86mm (L) x 65mm (W) x 26mm (H)
5REN, Up to 1Km on 24 AWG wire
Caller ID display or block, Call waiting caller ID, Call waiting/flash, Call transfer, hold,
forward, 3-way conferencing, message waiting, Do-Not-Disturb (DND), call-return
service
Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Yes
EN55022/EN55024 and FCC part15 Class B
UL
S
PECIFICATION
1 RJ45 10/100Mbps
4 LEDs (GREEN)
Input: 100-240V AC, 50/60Hz, 0.18A Max
Output: 12V DC, 0.5A
UL certified
86mm (L) x 65mm (W) x 25mm (H)
31 g (0.07lbs)
32~104°F / 0~40°C
10% - 90% (non-condensing)
HT-701 User Manual
Firmware Version 1.0.0.17
o
o
–40
C
Page 9 of 31
Last Updated: 02/2012
Advertisement
Table of Contents
