Using A Group Of External Lines; When A Group Is Busy; Switching To Speakerphone; Switching To Handset - Siemens HiPath 1100 User Manual

Functions used when making calls
Step by step
n
22

...Using a group of external lines

An extension can originate external call or calls to a
Master PABX through a group of external lines.
j
Enter the number of the appropriate group of external
lines to access an external line.
•
w
Wait for a dial tone.
j
Enter the external number you want to call.
w [
Wait for the call to be answered. Start conversation.

... When a group is busy

If an overflow group was configured when the system
was programmed, the call is made using a second
group of external lines.
The second group of external lines takes into account
the extension's class of service.

Switching to speakerphone

Conversation using the handset
\
and
Press and hold this key while placing the handset on the
hook. Release the key and resume the call.

Switching to Handset

Speaking with the speakerphone
^ [
and Lift the handset and resume conversation.
[1] When operating as a Sub-PABX for external calls or for calling ex-
0 890
or
= group of external lines;
tensions of a Master PABX, select the group of external lines be-
fore selecting the second external access code (0...9 or 00...99).
Or, select the extension number, as appropriate (see Important
Programming Data - Assigning groups of External Lines to Exten-
sions in the Programming manual). When a group of external lines
is programmed as a Sub-PABX a false dialing tone will not be gen-
erated.
Overflow group for external calls (see in Programming manual, Ex-
ternal line settings- Overflow for a group of external Lines).
1
899
up to