Parking - Siemens HiPath 1100 User Manual

Functions used during calls
Step by step

*56=Parking?

*56
0
#56=RTRV Parking?
#56
0
56
Parking
The Parking feature can place up to 10 internal or exter-
nal calls on hold and answer these at any extension.
Required: A call must be in progress.
N
Press this key.
Select and confirm.
or
N
Press this key.
Enter the code for Parking a call.
or
S
Press the "PARK" key.
9
... Select a Parking slot (e.g., 0).
\
Replace the handset.
or
n
Press this key. The LED goes off.
Recovering a parked call
N
Press this key.
Select and confirm.
or
Enter the code to retrieve the call.
or
S
Press the "PARK" key.
9
... Select a Parking slot (e.g., 0).
[
Start conversation.
[1] If the slot selected is busy, a rejection tone is heard.
If the call is not recovered from Parking, it will return to the exten-
sion that put it there after a certain time.
1