Optional Accessories - Vermont Castings SDVR Series Homeowner's Installation & Operating Manual

Fan Kits
FK28 Fan
The FK28 fan helps distribute heated air from within
the firebox out into the room. The fan is controlled by a
snapstat that turns power on and off as the firebox tem-
perature rises above and falls below a preset tempera-
ture. A rheostat provides for variable fan speeds.
Specifications
115 Volt / 60Hz / .75 Amps
Maintenance
The fan itself does not require regular maintenance,
however, periodic cleaning of the fan and the surround-
ing area is required.
Installation
Refer to Page 13 for installation instructions.
Remote Controls
The remote control allows you to turn the heater on or
off from anywhere in the room. Refer to Page 40 for
wiring diagrams.
Model Functions Controlled
RC1 ON/OFF
RC2 ON/OFF and Temperature
MRC3 ON/OFF and Temperature control
with a digital display and a
programmable 24 hour clock
IMT Wall mounted thermostat control
20007066
Pinnacle & Stardance Direct Vent - Rear Vent Gas Heaters

Optional Accessories

Screen Kit
An optional screen, S30SK, for use with the operable
doors is available for the Stardance only. The screen is
used when the doors are left in the open position.
Warming Shelf
Warming shelves add versatility to your stove; they can
be used to keep foods warm at mealtime.
Model Color
2702 Classic Black
2684 Biscuit
2685 Chestnut Brown (Stardance Only)
2688 Vt. Classic Green (Stardance Only)
2704 Bordeaux (Stardance only)
2706 Forest Green (Stardance only)
2711 Midnight Blue (Stardance only)
2764 Sand
2765 Ebony
The shelf installation is completed in three stages. First
attach the shelf loosely to the stove, leaving the screws
loose enough to allow final adjustments. Then, position
the shelf and adjust the brackets so the shelf fits cor-
rectly. Finally, tighten the screws.
Refer to the instructions included with each warming
shelf for complete installation procedures.
43