Genie 82784 Operator's Manual page 8

Operator's Manual
SAFETY RULES
Collision Hazards
Be aware of the extended platform position when
moving the machine.
The machine must be on a level surface or secured
before releasing the brakes.
Operators must comply with employer, job site and
governmental rules regarding use of personal
protective quipment.
Check the work area for overhead obstructions or
other possible hazards.
Be aware of crushing hazards when grasping the
platform guard rail.
Observe and use the color-coded direction arrows
on the platform controls and platform decal plate for
drive and steer functions.
6
Be aware of limited sight
distance and blind spots
when driving or operating.
Genie GS-2032 and Genie GS-2632
Second Edition • Second Printing
No stunt driving or horseplay while operating a
machine.
Do not lower the platform unless the area below is
clear of personnel and obstructions.
Limit travel speed according to the condition of the
ground surface, congestion, slope, location of
personnel, and any other factors which may cause
collision.
Do not operate a machine in the path of any crane
or moving overhead machinery unless the controls
of the crane have been locked out and/or
precautions have been taken to prevent any
potential collision.
Crushing Hazards
Keep hands and limbs out of scissors.
Use common sense and planning when operating
the machine with the controller from the ground.
Maintain safe distances between the operator, the
machine and fixed objects.
Part No. 82784