Genie 82784 Operator's Manual page 19

Second Edition • Second Printing
1 Select a test area that is firm, level and free of
obstruction.
2 Be sure the battery pack is connected.
At the Ground Controls
3 Pull out the platform and ground red Emergency
Stop buttons to the on position.
4 Turn the key switch to ground control.
5 Observe the diagnostic LED readout.
Result: LED should read 23 or --.
Test Emergency Stop
6 Push in the ground red Emergency Stop button
to the off position.
Result: No functions should operate.
7 Pull out the red Emergency Stop button to
the on position.
Test the Up/Down Functions
The audible warnings on this machine and the
standard horn all come from the same central
alarm. The horn is a constant tone. The descent
alarm sounds at 60 beeps per minute. The alarm
that goes off when the pothole guards have not
deployed sounds at 300 beeps per minute. The
alarm that goes off when the machine is not level
sounds at 600 beeps per minute. An optional
automotive-style horn is also available.
8 Activate the up function.
Result: The platform should raise.
9 Activate the down function.
Result: The platform should lower. The descent
alarm should sound while the platform is
lowering.
Part No. 82784
Test Auxiliary Lowering/Manual Lowering
10 Activate the up function and raise the platform
11 Activate the auxiliary lowering/manual lowering
12 Turn the key switch to platform control.
At the Platform Controls
Test Emergency Stop
13 Push in the platform red Emergency Stop button
Test the Horn
14 Pull the red Emergency Stop button out to the
15 Push the horn button.
Genie GS-2032 and Genie GS-2632
approximately 60 cm.
function. Move the toggle switch OR pull the
knob OR push the button.
Result: The platform should lower. The descent
alarm will not sound.
to the off position.
Result: No functions should operate.
on position.
Result: The horn should sound.
Operator's Manual
FUNCTION TESTS
17