Icom IC-M604 Instruction Manual page 44

6
DSC OPERATION
D D Offset Time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Enter "
 
(Push [MENU])
w Set the offset time from the UTC (Universal Time Coordi-
nated) time.
• Edit the digit of offset time directly with the keypad.
• Push [0• ] to edit " " or " ", when the cursor is on the first digit.
–/.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the time data.
• Push [CLR] to cancel and exit the condition to DSC set up menu.
No offset time (default)
e Push [ENT] to set and to exit the condition to DSC set up
menu.
r Push [CLR] or rotate [SELECTOR] to select "
push [ENT] to return to the DSC menu.
• Repeat again to return to the normal operation condition.
38
" in DSC Set up menu.
➪   ➪ 
(Rotate [SELECTOR], then push [ENT].)
+12 hours
D D NMEA Output
Select an NMEA Output function from List Station, All Station
or OFF.
When receiving position acknowledgment, the transceiver
outputs it to the external equipment via the NMEA connector.

q Enter "
 
(Push [MENU])
w Rotate [SELECTOR] to select the NMEA Output function
from List Station, All Station or OFF.
• List Station : Outputs the position data from the specified ves-
sels listed on the DSC individual ID screen.
• All Station : Outputs the position data from all vessels.
• OFF : Outputs no position data to external equipment.
e Push [ENT] to set and to exit the condition to DSC set up
menu.
• Push [CLR] to cancel and exit the condition to DSC set up menu.
r Push [CLR] or rotate [SELECTOR] to select "
,"
push [ENT] to return to the DSC menu.
• Repeat again to return to the normal operation condition.
" in DSC menu.
➪   ➪ 
(Rotate [SELECTOR], then push [ENT].)

,"