Icom IC-M604 Instruction Manual page 32

6
DSC OPERATION
D D Transmitting a Group call
The Group call function allows you to transmit a DSC signal
to a specific group only.
q Enter "
 
(Push [MENU])
w Rotate [SELECTOR] to select the desired pre-pro-
grammed group address or "
[ENT].
• The ID code for the Group call can be set in advance. (p. 17)
• When "
for the group you wish to call with keypad.
e Rotate [SELECTOR] to select a desired intership channel
or "
• Intership channels are already preset into the transceiver in rec-
ommending order.
26
" in DSC menu.
➪  
(Rotate [SELECTOR], then push [ENT].)
" is selected, set the 8-digit ID code
," push [ENT].
," push
r Push [ENT] to transmit the Group call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
t After the Group call has been transmitted, the following in-
dication is displayed.
y Push [CLR] to exit and the transceiver selects the inter-
ship channel specified in step e automatically.
• Even if [CLR] hasn't been pushed, the transceiver selects the
specified intership channel in step e automatically after 2 sec. of
inactivity.