Memory Operation; I Memory Channels; I Memory Channel Selection - Icom IC-7400 Instruction Manual

7

MEMORY OPERATION

I Memory channels

The transceiver has 101 memory channels (plus 1 call
channel). The memory mode is very useful for quickly
changing to often-used frequencies.
MEMORY
CHANNEL
Regular memory
channels
Scan edge
memory
channels
Call channel

I Memory channel selection

D D In VFO mode
q Push [V/M] to select VFO mode, if necessary, then
rotate [M-CH] to select a memory channel number.
• All memory channels including blank channels can be
selected.
• "BLANK" appears when no information has been pro-
grammed into a memory channel.
w Push [V/M] to select memory mode.
• "MEMO" and contents of the memory channel appear.
D D In memory mode
q Push [V/M] to select memory mode.
w Rotate [M-CH] to select a memory channel.
• All memory channels including blank channels can be
selected.
• Memory channels can also be selected using the micro-
phone [UP]/[DN] keys.
61
MEMORY
CHANNEL CAPABILITY
NUMBER
One frequency and one mode
1–99
in each memory channel.
One frequency and one mode in
P1, P2 each memory channel as scan
edges for programmed scan.
C Same as regular.
All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the tuning dial, etc. in memory mode.
TRANSFER
TO VFO
Yes
Yes
No
• During VFO mode
Disappears when a channel is programmed.
• During memory mode
OVER-
CLEAR
WRITING
Yes Yes
Yes No
Yes No
[V/M] [M-CH]