I Assigning Memory Names - Icom IC-7400 Instruction Manual

I Assigning memory names

All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 9 characters
each.
[EXAMPLE]: Programming "DX spot" into memory
channel 99.
q Push [V/M] to select memory mode, if necessary.
w Rotate [M-CH] to select memory channel 99.
e Push [MENU] several times to select
r Push [F2
] to select the memory name screen.
t Push [F1
] to edit memory channel name.
• A cursor appears and blinks.
• Memory channel names of blank channels cannot be
edited.
y Push [F1] several times to select the type of char-
acters for input.
• " " inputs capital letters A to Z.
• " " inputs small letters a to z.
• " " is used to input other characters— ! # $ % & ¥ ? "
' ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _ – are available.
• Use the keypad to directly input numerals, "0" to "9," in-
cluding a decimal point.
u Rotate the tuning dial to select the first character for
input.
i Push [F2 ] or [F3 ] to move the cursor forwards
or backwards, respectively.
• Push [F5 ] to input a space and [F4
the selected character.
o Repeat steps w to i to program another memory
channel's name, if desired.
!0 Push [MENU] to set the memory channel name and
return to the memory name menu.
• Push [MENU] 1 more times to return to
.
F 1
] to delete
F 1
.
F 1
• During assigning a memory name
F 1
• After assigning a memory name
F 1
MEMORY OPERATION
[V/M]
[MENU] Tuning dial [M-CH]
F 2 F 3 F 4
Push [F2 ]
F 2 F 3 F 4
Push [F2 ]
F 2 F 3 F 4
F 2 F 3 F 4
Delete a character
Move cursor forwards
Move cursor backwards
Selects character type
F 2 F 3 F 4
7
F 5
F 5
F 5
F 5
Input space
F 5
66