Auto Emergency Transmission; Stun Function - Icom IC-F50 Instruction Manual

Uhf transceiver and vhf transceiver

Hide thumbs Also See for IC-F50:

Table of Contents

BIIS OPERATION

I Auto emergency transmission

When [Emergency Single (Silent)] or [Emergency Repeat (Silent)] is

pushed, an emergency signal is automatically transmitted for the

speciﬁed time period.

The status 22 (Emergency) is sent to the selected ID station, and

the position data is transmitted after the emergency signal when a

GPS receiver is connected to the transceiver.

The emergency transmission is performed on the emergency chan-

nel, however, when no emergency channel is speciﬁed, the signal is

transmitted on the previously selected channel.

There is no change in the function display or beep emission during

automatic emergency transmission.

I Stun function

When the speciﬁed ID, set as a killer ID, is received, the stun func-

tion is activated.

When the killer ID is received, the transceiver switches to the pass-

code required condition. Entering of the passcode via the keypad is

necessary to operate the transceiver again in this case.

Table of Contents

Show Quick Links

Table of Contents

Ic-f60