Pc Connection; Biis Ani; Auto Emergency Transmission - Icom iC-F60 Instruction Manual

■ PC connection

When the optional OPC-966
transceiver, a PC can be connected to provide remote control, data
reception, etc.
Ask your dealer or system operator for connection details.

■ BIIS ANI

The own ID can be transmitted each time the PTT is pushed (log-
in) or released (log-off) during individual or group call communica-
tions.
By receiving the ANI, the communication log can be recorded when
using a PC dispatch application.
In addition, when using the ANI with log-in, the PTT side tone func-
tion can be used to inform you that the ID is sent and voice com-
munication can be performed.

■ Auto emergency transmission

When [Emergency Single (Silent)] or [Emergency Repeat (Silent)]
is pushed, an emergency signal is automatically transmitted for the
specified time period.
The status 22 (Emergency) is sent to the selected ID station, and
the position data is transmitted after the emergency signal when a
GPS receiver is connected to the transceiver.
The emergency transmission is performed on the emergency chan-
nel, however, when no emergency channel is specified, the signal
is transmitted on the previously selected channel.
There is no change in the function display or beep emission during
automatic emergency transmission.
interface cable
BIIS OPERATION
is connected to the
4
4
32