Input Mode - Denon AVR-1909 Owner's Manual

ENGLISH
Progressive Mode
Select optimum progressive mode for video material.
[Input source] DVD HDP TV/CBL
[Selectable items]
Auto
: Automatically detect video material type.
Video1
: Select mode suitable for video playback.
Video2
: Select mode suitable for video and 30-frame film material
playback.
This can be set when "i/p Scaler" is set to "A to H" .
Aspect
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
[Input source] DVD HDP TV/CBL
[Selectable items]
Full
: Output at 16:9 aspect ratio.
Normal
: Output at 4:3 aspect ratio.
This can be set when "i/p Scaler" is set to "A to H".

For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 17).
g Input Mode
Make input mode and decode mode settings for this source.
The selectable input modes depend on the input source and
VCR V.AUX
"Assign" setting (vpage 29).

Input Mode

Set the input mode for this source.
[Input source]
[Selectable items]
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
[Input source] CD
VCR V.AUX
[Selectable items]
Auto
: Automatically detect input signal and perform playback.
z1 : Play only signals from HDMI input. (Excluding CD and
HDMI
CDR/TAPE)
z2 : Play only signals from digital input.
Digital
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
z1: This can be selected for input sources for which the menu
"Assign" setting is set to "HDMI In" .
z2: This can be selected for input sources for which the menu
"Assign" setting is set to "Digital In" (vpage 35).
TUNER
CDR/TAPE DVD HDP TV/CBL VCR
V.AUX
• When a digital signal is properly input, the "
the display. If the " " indicator does not light, check the digital
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to
"EXT. IN".
Operating from the main unit or remote control
unit
INPUT MODE
Press .
Each time you press the button, the input mode display will change.
z1
Auto HDMI
EXT. IN Analog
z1: This can be selected for input sources for which the menu
"Assign" setting is set to "HDMI In" .
z2: This can be selected for input sources for which the menu
"Assign" setting is set to "Digital In" (vpage 35).
Decode Mode
Set the decode mode for this source.
[Input source] CD CDR/TAPE DVD HDP TV/CBL
V.AUX
[Selectable items]
Auto
: Detect type of digital input signal and decode and play
automatically.
PCM
: Decode and play only PCM input signals.
DTS
: Decode and play only DTS input signals.
• This can be selected for input sources for which the menu "Assign"
setting is set to "HDMI In" or "Digital In" (vpage 35).
• Only set "PCM" and "DTS" when playing the respective signals.
" indicator lights on
z2
Digital
VCR