Dolby Digital Setup; Auto Surround Mode; Eq Preset - Denon AVR-1909 Owner's Manual

ENGLISH
d Dolby Digital Setup
Set dynamic range for downmix playback of Dolby Digital
sources.
[Selectable items]
ON
: Compression is used. Select this if sound from front
speakers is distorted.
OFF
: Do not use compression. This is the recommended
setting.
• Set this to "ON" if the sound from the front speakers seems
distorted.
• When not using the center speaker or surround speakers, the
playback sound is down-mixed and output from the front speakers.
f Auto Surround Mode
Make setting for memorizing surround mode setting for each
input signal type.
[Selectable items]
ON
: Memorize settings. Most recently stored surround mode is
automatically selected.
OFF
: Do not memorize settings. Surround mode does not change
according to input signal.
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM,
etc.)
• When playing in the PURE DIRECT mode, the surround mode does
not change even if the input signal is changed.

For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 17).
g EQ Preset
Set MultEQ related settings and Manual EQ beforehand.
EQ Customize
®
When MultEQ and Manual EQ you are not using are preset, MultEQ
can be skipped when selected on the main unit or remote control
unit.
n Before running Auto Setup
[Selectable items]
Used Not Used
Manual :
n
After running Auto Setup
[Selectable items]
Used Not Used
Audyssey Byp. L/R :
Used Not Used
Audyssey Flat :
Used Not Used
Manual :
Direct Mode
Select "MultEQ" use for DIRECT or PURE DIRECT mode.
[Selectable items]
ON
: Use "MultEQ".
OFF
: Do not use "MultEQ".
Manual EQ
Adjust tonal quality for each speaker using graphic equalizer.
n Default
Reset the settings to the default values.
n Base Curve Copy
Copy the MultEQ "Audyssey Flat" correction curve.
"Base Curve Copy" is displayed after the auto setup procedure has
been performed.
n
Adjust CH
q S elect speaker adjustment method.
[Selectable items]
Each CH
: Adjust tonal quality for each speaker separately.
L/R CH
: Adjust tonal quality for each L/R speaker pair.
All CH
: Adjust tonal quality for all speakers together.
w S elect the speaker and frequency band and adjust the level.
[Selectable items]
63Hz 125Hz 250Hz
2kHz 4kHz 8kHz
–20dB ~
[Variable range] 0dB
500Hz 1kHz
16kHz
~
+6dB