Crossover Frequency; Front Speaker Setup; Hdmi Setup; Color Space - Denon AVR-1909 Owner's Manual

ENGLISH
g Crossover Frequency
Select crossover frequency from which subwoofer handles low
range signal.
[Selectable items]
40Hz 60Hz 80Hz 90Hz 100Hz
200Hz 250Hz
:
Only the portion of the bass sound of the various speakers output
from the subwoofer that has a frequency below the frequency set
here is output.
Set this according to the low frequency reproduction capabilities of
the speakers you are using.
Advanced
:
Set the crossover frequency separately for the different speakers.
• If in the "Advanced" settings, "Subwoofer Setup" (vpage 25)
in the menu is set to "LFE", it is possible to make this setting
for speakers set to "Small" at "Speaker Configuration". If set to
"LFE+Main", this setting can be made regardless of the speaker
size.
• For speakers set to "Small", sound below the crossover frequency
is cut from the sound output. The cut bass sound is output from the
subwoofer or front speakers.
• Always set the crossover frequency to "80 Hz". When using small
speakers, however, we recommend setting the crossover frequency
to a higher frequency.
h Front Speaker Setup
Select front speakers to use for each surround mode.
[Selectable items]
Normal
: To change the settings, select "Custom".
Custom
: When set to "Custom", you can select beforehand the
front speaker to use for each surround mode.
[Selectable items]
A B
DIRECT/STEREO :
A B
MULTI CH :
NOTE
<SPEAKERS>
When set to "Custom",

For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 17).

HDMI Setup

Make settings for HDMI video/audio output.
F Menu screen F
2.Manual Setup
110Hz 120Hz 150Hz
1.Speaker Setup
2.HDMI Setup
3.Audio Setup
4.ZONE2 Setup
5.Option Setup
a Color Space
Make settings for output color space.
[Selectable items]
YCbCr
RGB
When connected to a monitor with a DVI-D connector (HDCP
compatible) using an HDMI/DVI converter cable, the signals are output
in RGB format, regardless of this setting.
A+B
A+B
does not operate.
2-2.HDMI Setup

Color Space

YCbCr

RGB Range

Normal

Auto Lipsync

ON : OFF
2-2.HDMI Setup

HDMI Audio Out

AMP

HDMI Control

ON : OFF
Power Off Control
ON : OFF
: Output using YCbCr format.
: Output using RGB format.
s RGB Range
Make settings for RGB output range.
[Selectable items]
Normal
: Use video range from 16 (black) to 235 (white).
Enhanced
: Video range from 0 (black) to 255 (white). Use this
setting to avoid black washout.
When "YCbCr" is selected under "Color Space", "RGB Range" will
have no effect.
d Auto Lipsync
Automatic compensation for timing shift in audio and video
output.
ON OFF
[Selectable items]
f HDMI Audio Out
Select HDMI audio output device.
[Selectable items]
AMP
: Use speakers connected to receiver for audio playback.
TV
: Use speakers of TV for audio playback.
NOTE
When the HDMI control function is operating, the setting of audio
playback in the connected TV takes priority (vpage 53 "HDMI
Control Function").
g HDMI Control
Make settings for HDMI control function.
[Selectable items] ON OFF
Please consult the operating instructions for each connected device
to check the settings.
NOTE
For details, see "HDMI Control Function" (vpage 53).