Preparations; Turning The Power; Selecting The Input Source; Setting The Input Mode - Denon AVR-1509 Owner's Manual

ENGLISH
Playback
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
SOURCE SELECT
<SOURCE> <STATUS><DIMMER>
<POWER>
PHONES jack
<ON/STANDBY>
INPUT MODE
[Front]
[ON/SOURCE]
[OFF]
[QUICK SELECT]
SOURCE SELECT
[TUNER]
[MASTER
VOLUME]
TUNING
[MUTING]
[SOURCE
CONTROL 1]
[SOURCE
CONTROL 2]
0

Preparations

BUTTON
Turning the Power On
<BUTTON>
[BUTTON]
1
<POWER>
Press
The power indicator lights red and the power is set to the
BAND
standby mode.
<MASTER VOLUME>
2
<ON/STANDBY>
Press
The power indicator fl ashes green and the power turns on.
b Also press
turns on. In this case the input source is selected by remote
control unit.
b Also press
turns on. In this case Quick Select is selected by remote control
unit (vpage 37).
TUNING Turning the Power Off
<SPEAKERS>
<ON/STANDBY>
q Press
The power is set to the standby mode.
[Rear]
<POWER>
w Press
The power indicator turns off, and so does the power.
NOTE
Power continues to be supplied to some of the circuitry even when the
[TUNER]
power is in the standby mode. When leaving home for long periods of
SOURCE
time or when traveling, either press
SELECT
or unplug the power cord from the power outlet.
[VIDEO
SELECT]
TUNING

Selecting the Input Source

[MODE]
Select the source using
BAND
<SOURCE SELECT>
Turn
INPUT
between input sources.
MODE
If "Rec Select" is selected for the input source, press
before turning
.
[ON/SOURCE].
or
[SOURCE SELECT]
when in standby mode, the power
[QUICK SELECT]
when in standby mode, the power
[OFF]
or .
.
<POWER>
to turn off the power,
SOURCE SELECT
.
[SOURCE SELECT]
or press to switch
<SOURCE>
<SOURCE SELECT>
.

Setting the Input Mode

Set the input mode for this source.
INPUT MODE
Press .
Each time you press the button, the input mode display will change.
Auto PCM
EXT. IN Analog
[Selectable items]
Auto
: Detect type of digital input signal and decode and play
automatically.
PCM
: Decode and play only PCM input signals.
DTS
: Decode and play only DTS input signals.
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
• When a digital signal is properly input, the "
on the display. If the " " indicator does not light, check the
digital input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to "EXT.
IN".
• Only set "PCM" and "DTS" when playing the respective signals.
DTS
" indicator lights