Denon AVR-1509 Owner's Manual page 51

GAudioH
Symptom Cause
No sound is • You are playing a monaural
produced from source (TV, AM radio broadcast,
center speaker. etc.) in the "STANDARD" (Dolby/
DTS Surround) mode.
No sound • The surround mode is set to
is produced "STEREO" or "DIRECT" .
from surround
speakers.
No sound is • Subwoofer's power not turned
produced from on.
subwoofer. • The "Subwoofer" setting at
"Speaker Configuration" is set to
"No" .
• The subwoofer is not properly
connected.
• The subwoofer's volume
turned off.
No test tones are • Surround mode not set to
produced when " S TA N D A R D " ( D o l b y / D T S
remote control Surround).
TEST
unit's button
is pressed.
DTS sound is not • DVD player's audio output setting
output. is not set to bitstream.
• DVD player is not compatible
with DTS sound playback.
• The AVR-1509's "Input Mode"
setting is set to other than
"DTS" .
GVideoH
Symptom Cause
No picture • The connections between the
appears. AVR-1509 and monitor are faulty.
• The monitor's input setting is
wrong.
• The player is connected using the
component input connectors, the
monitor is connected using the
video (yellow) or S-Video output
connectors.
DVDs cannot be
copied on a VCR.
–
Countermeasure Page
• The mode is set to something 24
other than "STANDARD" (Dolby/
DTS Surround).
• Set to a surround playback 24
mode.
• Turn on the subwoofer's power. –
• Set to "Yes" . 19
• Check the connections. 8
is • Adjust the subwoofer's volume 36
to an appropriate level.
• Set to the "STANDARD"(Dolby/ 24
DTS Surround) mode.
• Set the DVD player. For details, –
refer to the DVD player's
operating instructions.
• Use a DTS-compatible player. –
• Set to the "Auto" or "DTS" 30
mode.
Countermeasure Page
• Check the connections. 9 ~ 12
• Set properly. –
• In the case of a player which –
is connected to component
terminals, if the monitor is not
connected to the component
terminals, the image will not
appear. Check the connections.
• This is not a malfunction. Most –
movie software includes copy
prevention signals and cannot be
copied.
GHDMIH
Symptom Cause
HDMI audio
signals are not
output from
–
speakers.
No picture • The connections to the HDMI
appears connectors are faulty.
with HDMI • HDMI input setting is improper.
connections. • The HDMI format of the player
and monitor do not match.
No sound is • HDMI input setting is improper.
output from
the monitor
connected
with HDMI
connections.
GiPodH
Symptom Cause
iPod cannot be • The input source assigned to
played. control dock for iPod is not
selected.
• Cable is not properly connected.
• Control dock for iPod's AC
adapter is not connected to
power outlet.
ENGLISH
Countermeasure Page
• The audio signal input to the 9, 11
HDMI input connector cannot be
played on the AVR-1509. Input
the audio signal to the digital
audio input connector or analog
audio input connector.
• Check the connections. 9, 11
• Check the HDMI input setting. 21
• Match the HDMI format of the 9, 11
player and monitor.
• Check the HDMI input setting. 21
Countermeasure Page
• Switch to the input source 21
assigned at control dock for
iPod.
• Reconnect. 11
• Plug the control dock for iPod's –
AC adapter into a power outlet.