Feeding Speed Manual Setting - Roland CAMM-3 PNC-3100 User Manual

Feeding Speed Manual Setting

At times when speed cannot be set with the software or when adjusting the speed during an ongoing cutting
operation use the panel switch keys to set cutting tool movement speed.
Press the [PAUSE ON] key.
1
• PAUSE LED comes ON.
Press the [ENTER] key.
2
• The current feeding speed of each axis is
displayed on the coordinate display of
the switch panel. (Units are in mm/sec.)
Press the Jog key ([
3
[ ], [ ]).
(Z) (Z)
• Use the [ ], [ ], [
movement.
Use the [ ], [ ], [
slow movement.
• The X axis and Y axis speeds cannot be
set separately.
Press the [OFF] key.
4
• PAUSE LED goes OFF.
], [ ], [ ], [ ],
] jog keys for fast
(Z)
] jog keys for
(Z)
23
Part 2
X
-AXIS
30
Y
-AXIS
30
Z
-AXIS
10
Feeding speed will
change.