Finishing - Roland CAMM-3 PNC-3100 User Manual

12. Finishing

When all cutting operations are complete
press the [VIEW] key for at least half a
1
second.
• Raise the cutting tool, move the XY
table to the outer left (close to
operator) and stop it.
• When the spindle is still rotating, press
the [SPINDLE TEST ON/OFF] key
in order to stop it.
• After turning off the power, removal of
the workpiece and cutting tool will be
easier now that the spindle has been
moved out of the way.
After the power to the computer has
been turned off, turn the power to the
2
PNC-3100 off.
• The POWER/ERROR LED turns off.
• Next remove the completed workpiece
and the cutting tool.
• Store the cutting tool that was just
removed, carefully so it will be ready
for use when needed.
CAUTION
The tool becomes hot when
metal is cut. Take care to
avoid burns when detaching.
Use an appliance such as a vacuum
cleaner to remove cutting chips and grit
3
from the machine and surrounding area.
• Do not use an compressed air for such
cleaning. Cutting chips in the air may
attach to a portion of the machine and
cause malfunctions or breakdowns.
• Be especially careful to remove the
cutting waste from around the pleated
part of the bellows cover.
• Keep the PNC-3100 and its accessories
in neat and proper order and use care
to ensure normal work operations are
carried out safely.
Bellows
cover
19
Part 1
At least
0.5 seconds.
Bellows
cover