Removing The Protective Material - Roland METAZA MPX-70 User Manual

Removing the Protective Material

Protective material is attached to protect the machine from vibration and the like during transportation. Remove this
once the machine is installed.
Be sure to remove the protective material. Any that remains may cause breakdown when the power is switched
on.
The protective material is required when moving the machine. Be sure not to discard it.
Procedure
Knob
Loosen the knob.
The head unit rises.
Head unit
Remove the protective material.
Protective material
Protective material
Chapter 2 Getting Ready to Print
2-1 Installation
17