Installing The Driver - Roland METAZA MPX-70 User Manual

Installing the Driver

Never make the connection to the computer before installing.
Keep the machine and the computer unconnected until you carry out this installation operation. Failure to follow
the correct procedure may make installation impossible.
p 75 "What to Do If Installation Is Impossible"
Before you start installation and setup, make sure the USB cable is not connected.
Log on to Windows. If you are installing under Windows 2000/XP, log on as "Administrators" right.
Follow the instructions in the Installation and Setup Guide to finish installing.
Installation and Setup Guide
If the [Driver Setup] Window Doesn't Appear
If you're using Windows 98 SE/Me/2000 and the Setup program doesn't appear, first check the taskbar at the
bottom of the screen. If [Driver Setup] is displayed, the program is running. Go to the taskbar and click [Driver
Setup] to display the window for the Setup program.
2-3 Installing and Setting Up the Software
Insert the included CD-ROM into the CD-
ROM drive.
After a short wait, the setup menu shown at left ap-
pears.
Click [METAZA Driver Install].
An Installation and Setup Guide matched to the basic
software on your computer is displayed.
If you're using Windows 98 SE/Me/2000, the Installa-
tion and Setup Guide and the Setup program appear.
Setup program
(Windows 98 SE/Me/2000)
Chapter 2 Getting Ready to Print
Taskbar
Click this.
21