Roland METAZA MPX-70 User Manual page 38

3-6 Starting Printing
Cover
When Printing Ends
After printing has finished, be sure to loosen the knob and raise the head.
This prevents damage to the head and the adhesive sheet.
36 Chapter 3 Performing Printing
Knob
Click [OK].
The printing data is sent to the machine and printing
starts.
After printing has finished, open the cover.
Loosen the knob.
Detach the material.
If the material is difficult to detach, inserting a thin, flat object (such
as a piece of stiff paper or cardboard) between the adhesive sheet
and the material may make it easier to dislodge.