Wear The Polar G1 Gps Sensor - Polar Electro RS300X User Manual

ENGLISH

Wear the Polar G1 GPS Sensor*

• The GPS sensor has to be activated from the training computer
before it can be used: UP/DOWN >
> .
sensor GPS
• Install a battery before using the GPS sensor for the first time. See
the Polar G1 GPS sensor user manual.
*Optional G1 GPS sensor required.
Wearing the GPS Sensor
1. Push to open the clip.
2. Thread the armband loosely through the loops on the clip and
fasten.
3. Position the armband round your upper arm and fasten. Place the
sensor and the training computer on the same arm. Make sure
that the "POLAR" logo is in an upright position.
4. Turn the GPS sensor on only after your heart rate appears on your
training computer. See the Polar G1 GPS Sensor user manual for
further instructions on turning the sensor on.
You can fasten the sensor on a belt or on the top of a backpack
without the armband.
16 Training
Settings > Features > S