Quick Setup - Radio Shack 7-in-One Home Theater Owner's Manual

15-1935.fm Page 6 Thursday, December 31, 1998 11:37 AM

QUICK SETUP

The steps in this section tell you how to quickly set up
the 7-in-One to operate all of your devices.
To set up devices individually, or add a device after you
have set up the 7-in-One, see the appropriate section
under "Setting Up the Remote."
Note: For the best operation, you should be within 15
feet of the device you want to control.
Follow these steps for quick setup.
1. Turn on all of the devices you are setting up.
2. Press .
TV
3. Hold down
SETUP
4. Press . CODE SETUP appears.
MENU
5. Press . DEV SET UP appears.
SELECT
6. Press again. TV appears.
SELECT
7. Enter the first three-digit TV code listed for your
TV's brand in "Setup Codes for TVs" on Page 12,
then press
SELECT
8. Point the remote at your TV and press
Your TV should turn off. If it does not, enter the next
code from the list and press
again. When your TV turns off, press
appears.
9. Enter the first three-digit VCR code listed for your
VCR's brand in "Setup Codes for VCRs" on
Page 16 or "Setup Codes for TV/VCR Combos" on
Page 19, then press
Need help? Call 1-800-763-9232
6
until TIMED SEQ appears.
.
then
SELECT
.
SELECT
.
POWER
POWER
. VCR
VCR